Ferm FET-100 185650 Mode D'emploi page 5

Agrafeuse-cloueuse
Table des Matières

Publicité

,
.
Ferm
.
.
,
.
.
,
.
,
,
,
.
.
, . .
,
Ferm.
.
.
.
.
44
ı
CE
EN50144-1, EN50144-2-16,
EN51044-1, EN51044-2,
EN61000-3-2, EN61000-3-3
:
,
98/37/EEC
.
73/23/EEC
89/336/EEC
01-11-2001
GENEMUIDEN NL
G.M. Ensing
Quality department
,
.
MAINTENANCE
Make sure that the machine is not live when carry-
( GR )
ing out maintenance work on the motor.
The Ferm machines have been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon pro-
per machine care and regular cleaning.
Cleaning
Keep the ventilation slots of the machine clean to pre-
vent overheating of the engine.
Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots free
from dust and dirt.
If the dirt does not come off use a soft cloth moistened
with soapy water. Never use solvents such as petrol,
alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please con-
tact your local Ferm dealer.
In the back of this manual you find an exploded view sho-
wing the parts that can be ordered.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these
materials to the appropriate recycling locations.
Take your unwanted machines to your local Ferm-dea-
ler. Here they will be disposed of in an environmentally
safe way.
GUARANTEE
The guarantee conditions can be found on the separately
enclosed guarantee card.
Ferm
Ferm
ı
( UK )
CE
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in conformity with the following
standards or standardized documents
EN50144-1, EN50144-2-16,
EN51044-1, EN51044-2,
EN61000-3-2, EN61000-3-3
in accordance with the regulations.
98/37/EEC,
73/23/EEC,
89/336/EEC
from 01-11-2001
GENEMUIDEN NL
G.M. Ensing
Quality department
5

Publicité

Table des Matières
loading

Table des Matières