Control Panel - Enodis MENUKEY2 Notice D'utilisation

CONTROL PANeL

MULTI-STAGE
INDICATOR/ PROGRAM DISPLAY
P
PROGRAM PAD
time
TIME/ERROR DISPLAY
PROGRAM DISPLAY/MuLTI-STAGe INDICATOR
The program display indicates the program number
selected. 'P' indicates programming stage in a multi-stage
program.
POWeR PAD ( Microcook HD only )
The Power Pads select 100%, 50% Microwave power or
Defrost option. A light will indicate when in use.
(These pads are blanked out on Microcook HDV models.)
TIMe DISPLAY & eRROR DISPLAY
Shows the time set in minutes and seconds and counts down
in 1 second steps during a cooking
cycle. Also displays error messages.
( See PROBLEM SOLVING )
Program
1
2
3
1 2 3
TIME/PROGRAM SELECT PADS
POWER PADS
time
100% 50%
4 5 6 7
1 1
2 2
3 3
PROGRAM DISPLAY
MULTI-STAGE INDICATOR
CANCeL/ CALLbACk 'C' PAD
Cancels all timed cooking cycles, pre-programmed
operations and stops the microwave energy. This pad
will also cancel any incorrect operations. It will not erase
programs. It can also be used to view the details of stored
programs. ( see CALL BACK )
TIMe/PROGRAM SeLeCT PADS
These pads are used for setting the cooking time in 1 second
steps to a maximum of 30 minutes.
They are also used for programmes from 1-9.
PROGRAM PAD
Activates multi-stage cooking and allows programming of
preset pads.
9
TIME/ERROR DISPLAY
8 9 0
C
Program Program
CANCEL PAD