Remote Control Pairing; Universal Intercom Pairing; Factory Reset; Exit Voice Configuration Menu - Sena SRL2 Mode D'emploi

22.7 Remote Control Pairing

Voice Prompt
Factory Default
Execute
To enter into Remote Control Pairing mode, tap the (+) Button or the (-)
Button until you hear a voice prompt, "Remote control pairing". Then
tap the Center Button to enter into Remote Control Pairing mode. The
headset will automatically exit from the configuration menu. Please
refer to section 18 for details on remote control pairing.

22.8 Universal Intercom Pairing

Voice Prompt
Factory Default
Execute
To enter into Universal Intercom Pairing mode, tap the (+) Button or the
(-) Button until you hear a voice prompt, "Universal intercom pairing".
Then tap the Center Button to enter into Universal Intercom Pairing
mode. The headset will automatically exit from the configuration menu.
Please refer to section 16 for details on Universal Intercom.
"Remote control pairing"
N/A
Tap the Center Button
"Universal intercom pairing"
N/A
Tap the Center Button

22.9 Factory Reset

Voice Prompt
Factory Default
Execute
To restore factory default settings on the SRL2, tap the (+) Button or
the (-) Button until you hear a voice prompt, "Factory reset", and tap
the Center Button to confirm. The SRL2 powers off with a voice prompt,
"Headset reset, good-bye".

22.10 Exit Voice Configuration Menu

Voice Prompt
Factory Default
Execute
To exit voice configuration menu and get back to stand-by mode, tap
the (+) Button or the (-) Button until you hear a voice prompt, "Exit
configuration", and tap the Center Button to confirm.
SRL2
"Factory reset"
N/A
Tap the Center Button
"Exit configuration"
N/A
Tap the Center Button
49