Fm Station Guide (Default: Enable) - Sena SRL2 Mode D'emploi

SRL2
10.5 Temporary Preset
With the temporary preset function, you may temporarily preset
stations automatically without changing the existing preset stations.
Tap the (+) Button three times to automatically scan for 10 temporary
preset stations. The temporary preset stations will be cleared when the
system is powered off.
10.6 Region Selection
You can select the proper FM frequency region from the Device
Manager. With the region setting, you may optimize the seek function
to avoid unnecessary frequency ranges.
Region Frequency range
Worldwide 76.0 ~ 108.0 MHz
Americas 87.5 ~ 107.9 MHz
Asia 87.5 ~ 108.0 MHz
Australia 87.5 ~ 107.9 MHz
Europe 87.5 ~ 108.0 MHz
Japan 76.0 ~ 95.0 MHz
30
10.7 RDS AF Setting (Default: Disable)
You can enable or disable RDS AF setting through the Sena Device
Manager or the Sena Smartphone App. RDS AF allows a receiver to
re-tune to the second frequency location when the first signal becomes
too weak. With RDS AF enabled on the receiver, a radio station with
more than one frequency can be used.

10.8 FM Station Guide (Default: Enable)

You can enable or disable FM Station Guide through the Sena Device
Manager or the Sena Smartphone App. When FM Station Guide is
enabled, FM station frequencies are given by voice prompts as you
select preset stations. When FM Station Guide is disabled, the voice
Step
prompts on FM station frequencies will not be given as you select
preset stations.
± 100 kHz
± 200 kHz
± 100 kHz
± 200 kHz
± 100 kHz
± 100 kHz