Speed Dialing - Sena SRL2 Mode D'emploi

SRL2
Note:
1. If you are using second mobile phone connection and you have an
incoming call from the second phone during the call of the first phone,
then you may still receive the call from second phone. In this case, the
call from the first phone is on waiting mode. If you end a call, then it will
automatically guide you to the first phone call.
2. If you are using second mobile phone connection of mobile phone and
GPS, you may not be able to listen to the GPS voice instruction during the
phone call.

6.2 Speed Dialing

6.2.1 Assigning Speed Dial Presets
You can assign phone numbers for speed dialing through the Sena
Device Manager or the Sena Smartphone App. Please visit the Sena
Bluetooth website at www.sena.com for more information.
6.2.2 Using Speed Dial Presets
You can quickly make a phone call by using the voice speed dial
menu.
1. To enter into the voice speed dial menu, press the (+) Button for
3 seconds and you will hear a mid-toned single beep and a voice
prompt saying "Speed dial".
24
2. Tap the (+) Button or the (-) Button to navigate between the
menus. You will hear voice prompts for each menu item.
3. Tap the Center Button to select a voice menu among the followings:
(1) Last number redial
(2) Speed dial 1
(3) Speed dial 2
4. To redial the last number called, tap the Center Button when you
hear a voice prompt saying "Last number redial".
5. To call one of the speed dials, tap the Center Button when you
hear the voice prompt, "Speed Dial (#)".
6. If you want to exit the speed dial immediately, tap the (+) Button
or the (-) Button until you hear a voice prompt saying "Cancel",
and tap the Center Button. If any button is not pressed within 15
seconds, the SRL2 will exit the voice speed dial menu and go
back to stand-by mode.
Note:
1. Make sure that you connect the mobile phone and the headset in order
to use the speed dial function.
2. Speed dial needs to be setup through the Sena Smartphone App or the
Sena Device Manager first.
(4) Speed dial 3
(5) Cancel