Care In Cold Climates; Storing The Washer - LG WM4500H A Serie Manuel D'utilisation

Masquer les pouces Voir aussi pour WM4500H A Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6
Reassemble the plug onto the drain hose and
reclip the drain hose.
7
Insert the drain pump filter and twist it
clockwise.
8
Close the drain pump filter cover.
NOTE
• An
message blinks on the display when the
OE
drain pump filter is clogged with dirt. Clean the
drain pump filter.

Care in Cold Climates

Storing the Washer

If the washer will not be used for an extended
period of time and is in an area that could be
exposed to freezing temperatures, follow these
steps to protect the washer from damage.
NOTE
• Make sure the drum is empty before following
these steps.
1
Turn off the washer, and unplug the power
cord.
2
Turn off the water faucets.
3
Disconnect the water inlet hoses. Drain any
water from the hoses.
4
Plug the power cord into a properly grounded
electrical outlet.
5
Add 1 gallon of nontoxic recreational vehicle
(RV) antifreeze to the empty drum and close
the door.
• Never use automotive antifreeze.
6
Turn on the washer and press the Spin
button.
7
Press the Start/Pause button to start the
drain pump for 1 minute.
• This will expel some of the antifreeze,
leaving enough to protect the washer from
damage.
8
Turn off the washer and unplug the power
cord.
9
Dry the drum interior with a soft cloth, and
close the door.
10
Store the washer in an upright position.
11
Remove the inserts from the dispenser. Drain
any water in the compartments and let them
dry.
MAINTENANCE
41

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wm4500hba

Table des Matières