Technical Characteristics; Technical Specifications - Baier BDN 511 Traduction De La Version Originale Du Mode D'emploi

EN
12

Technical Characteristics

12.1 Technical specifications

Diamond channel cutter type
Manufacturer
Operating voltage (V / Hz)
Connection plug (type)
Power consumption (watt)
Protection class
-1
No-load speed (min )
Disc diameter (mm)
Maximum disc thickness (mm)
Maximum cutting width (mm)
Cutting depth (mm)
Weight (kg)
2)
Machine
Diamond dry-cutting disc
Speed electronics
Sound measurement 3)
L (sound pressure) dB (A)
pA
L (sound power) dB (A)
WA
Vibration measurement:
Front handle (13) 1
Rear handle (2)
1
1) With a cutting width of 50 mm, a clear channel is formed.
Weight without insert tool and connection cable.
2)
3) Measured values for noise determined according to EN 60745. Wear hearing protection!
4) Total vibration values (vector sum in three directions) determined according to EN 60745 (continued on
next page).
The vibration emission values given in this instruc-
tion manual have been measured according to a
method of measurement standardised in EN 60745
and can be used for comparison between power
tools. They are also suitable for a preliminary esti-
mate of the vibratory stresses.
The vibration emission values given represent the
main applications of the power tool. If the power
tool is used for other applications, with different
insert tools or are insufficiently serviced, this can
significantly increase the vibratory stresses over
the whole work period. For a precise estimate of the
vibration emission values, the times during which
the tool is switched off or is running but not actually
in use should also be taken into account. This can
reduce the vibration stresses over the whole work
period significantly.
| 34 |
K = 3 dB
4) K = 1.5 m / s
2
m / s
m / s 2
Maschinenfabrik OTTO BAIER GmbH
~230 / 50 / 60
EU, round pin plug
2400
/ II
7200
150
3.5
50 1)
7 – 25
6.2
0.220
Yes
97
108
2
2.4
3.7
WARNING
Health risk due to vibrations.
Î Additional safety measures should be taken to
protect the user, e.g. wearing anti-vibration pro-
tective gloves, correct maintenance of power
tools and insert tools, keeping hands warm and
good organisation of work sequences.
BDN 511
~230 / 50 / 60
USA, NEMA 6
2400
/ II
7200
150
3.5
50 1)
7 – 25
6.2
0.220
Yes
97
108
2.4
3.7