Mount Thermostat And Outdoor Sensor - Honeywell RedLINK Manuel D'installation

6
Mount thermostat & outdoor sensor
3/16" holes for drywall
7/32" holes for plaster
Wall anchor
Detach wallplate
Outdoor sensor (optional)
To check location before mounting: Restore
thermostat Home screen, then hold the sensor
where you intend to install it and press the
button. If sensor is working properly, thermostat will
switch to display outdoor temperature and humidity.
Español: vea la página 20 • Français : voir la page 39
Wallplate
Mount the sensor on a
vertical exterior wall, at
least 6 inches below
any overhang. Choose
a location protected
from direct sunlight.
Place sensor securely
in bracket, facing
away from wall
Press and release
CONNECT
13
Mounting screw