Air Purifier Set-Up; Display Panel - Fellowes AeraMax DX5 Mode D'emploi

AIR PURIFIER SET-UP

NOTE: Follow these instructions for
best results.
• Place unit at least 2 feet (½ meter) from
the wall.
• Keep unit away from drafty areas.
• Keep curtains away from unit, as they
may interfere with air intake/outlet.
• Place unit on a stable surface with plenty
of air circulation.
1. Remove protective film from the
control panel.
2. Compress tab and pull out back panel.
3. Remove bag from filters. Place filters
back in unit.
4. Insert Carbon Filter first and then True
HEPA Filter.
AeraMax-DX5_870323_RevB_3L_032117.indd 6-7
5. Fully insert filter panel bottom tabs first,
then insert top tab until click is heard.
6. Plug in the power cord to a wall outlet.
7. Turn unit on. Unit will beep.
For approximately the first 4
minutes after turning the unit on,
the auto icon will flash while the unit
measures air quality.
6 6

DISPLAY PANEL

1. AeraSmart™ SENSOR - Monitors the air quality and
automatically adjusts the fan speed to keep your air
purified. Blue, amber and red lights indicate the purity
of your air. The unit is set to default to automatic
operation when it is first turned on. If in manual
operation, go back to auto at any time by pressing
the auto icon.
2. Aera+™ MODE - Designed for peak allergy season
conditions. Increases air turnover rate by 35% versus
low fan setting mode to remove even more allergens
from your air. Switch to Aera+™ mode by pressing the
icon. To return to auto operation, press the
once more to turn off.
3. FAN SPEED INDICATOR - Shows current fan speed
setting: low, medium or high speed.
4. MANUAL FAN SPEED ADJUSTMENT - Tap fan icon
to manually select fan speed.
5. TRUE HEPA FILTER CHANGE INDICATOR - Amber
and red lights indicate when to replace filter. The
red indicator light will signal when to replace filter.
(Recommended to replace filter every twelve months
under normal usage conditions.) For replacement
filters, see page 4.
6. CARBON FILTER CHANGE INDICATOR - Amber
and red lights indicate when to replace filter. The
red indicator light will signal when to replace filter.
(Recommended to replace filter every three months
under normal usage conditions.) For replacement
filters, see page 4.
7. PlasmaTRUE™ TECHNOLOGY - Creates an ionized
field to help safely remove airborne pollutants.
1
2
icon
3
4
5
6
7
7
4/21/17 10:07 AM