Generac 6565 Manuel De L'opérateur page 12

Set-up
2. Select desired nozzle:
3. Pull back on the collar, insert the new nozzle and release the
collar. Tug on the nozzle to make sure it is securely in place.
• The WHITE NOZZLE is used for delicate rinse (lower pressure and
higher flow), for gentle cleaning of cars/trucks, boats, RV's, patio
furniture, lawn equipment, etc. (Figure 18).
Figure 18 – Wash Pressure Nozzle (White)
• The GREEN NOZZLE is for general rinsing (medium pressure and
medium flow), ideal for most all purpose cleaning such as home
siding, brick patios, wood decks, driveways and sidewalks, garage
floors, etc. (Figure 19).
Figure 19 – Clean Pressure Nozzle (Green)
• The yellow nozzle is for medium rinsing (higher pressure and
medium flow), ideal for removing stains on hard porous surfaces
such as concrete dirveways, garage floors and brick patios, select
yellow nozzle (Figure 20).
10
Figure 20 – Strip Pressure Nozzle (Yellow)
• The RED NOZZLE is for maximum rinsing (higher pressure and
lower flow); for stubborn or hard to reach surface such as second
story surfaces, paint removal, oil stains, rust removal or other
stubborn substances (tar, gum, grease, wax, etc.) (Figure 21).
CAUTION
This nozzle can damage work surfaces if it is too close,
or held in one position for an extended period of time.
Figure 21 – Blast Pressure Nozzle (Red)
• Use the BLACK NOZZLE when applying detergent (Figure 22).
Only use power washer safe detergents/soaps to help break down
stubborn dirt and grime on a variety of surfaces.
Figure 22 – Detergent Nozzle (Black)
(000125)