Checking Operation; Before You Call For Service - Electrolux ICON Professional Serie Instructions D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MICROWAVE/ WALL OVEN COMBINATION
9
Install the Anti-tip Mounting Screws
The wall oven can tip when the door
is open. The anti-tip mounting screws supplied
with the wall oven must be installed to prevent
tipping of the wall oven and injury to persons.
A. The mounting holes in the side trims may be used
as a template to locate the appliance mounting screw
holes (see fi gure 10).
B. Use the two screws supplied to fi x the appliance to
the cabinet.
Tip Over Hazard
• A child or adult can tip the oven
and be killed.
• Install the anti-tip device to oven
and/or structure per installation
instructions.
• Ensure the anti-tip device is re-engaged when the
oven is moved.
• Do not operate the oven without the anti-tip device
in place and engaged.
• Failure to follow these instructions can result in
death or serious burns to children and adults.
Anti-tip mounting holes
INSTALLATION INSTRUCTIONS
Figure 10
Refer to the installation
instructions supplied with your
appliance for proper installa-
tion.
Check for proper installation
with a visual check that the
anti-tip screws are present.
Test the installation with light
downward pressure on the
open oven door. The oven
should not tip forward.
5. Leveling the Wall Oven
1. Install an oven
rack in the center
of the lower oven
(see Figure 11).
2. Place a level on
the rack. Take
2 readings with
the level placed
diagonally in one
direction and
then the other.
Use wood shims under the wall oven to level if
necessary.
IMPORTANT NOTE
A cooling fan inside the upper rear part
above the oven (some models) provides
cooling of the oven electrical and
electronic components. If the oven has
been operating at high temperatures, the
fan will continue to run after the oven is
turned off.

6. Checking Operation

Your model is equipped with an Electronic Oven
Control. Each of the functions has been factory checked
before shipping. However, it is suggested that you verify
the operation of the electronic oven controls once more.
Refer to the Use and Care Guide for operation.
1. Remove all items from the inside of the oven.
2. Turn on the power to the oven (Refer to your Use &
Care Guide.)
3. Verify the operation of the electronic oven controls:
Bake– Verify that this function makes the oven hot.
20 seconds after turning oven on, open the door and
you should feel heat coming from the oven.
Broil– When the oven is set to BROIL, the upper
element in the oven should become red.
Convection (some models)–When the oven is set for
a convection baking or roasting, both elements cycle
on and off alternately and the convection fan will run.
The convection fan will stop running when the oven
door is opened.

Before You Call for Service

Read the "Before You Call for Service Checklist" and the
"Operating Instructions" in your Use and Care Guide.
It may save you time and expense. The list includes
common occurrences that are not the result of defective
workmanship or materials in this appliance.
Refer to your Use and Care Guide for service phone
numbers.
6
Figure 11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Icon e30mc75pIcon e30mc75ppsEw27mc65jb1Ew27mc65jsEw27mc65jb

Table des Matières