Krampouz CTRH4 Notice D'utilisation page 23

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
Standard range, 40 cm diameter (CSRS4, CSCS4, CSCS8)
Luxury range 35 cm diameter (CTRH3, CTCH3, CTCH7)
Rated power per burner: 5 kW
Category
index
and pressure
I3+
28-30/37mbar
I3B/P
I2E+
I2H
I2E
I2Elw
I2Ek
I2ELL
Installation
Type A1 appliance: without fan. When used indoors, an open space above the plate is required near
an extractor system, in compliance with the regulations of the country. Provide a change of air for the
combustion air supply of at least 200m3/h/plate.
Gas connection
The configuration of the appliance supply is indicated by a marking (X) on the information plate
affixed to the back of the appliance.
To change the gas configuration of your appliance, refer to the "Adjustment" chapter page 26
- Always connect the crepe maker via the front of the appliance using a hose that conforms to the
standards below for natural gas and gases of the 3rd Butane/Propane family.
- Check the sealing of the coupling using soapy water.
- Never test leak-tightness using a flame.
- Do not use a butt teat.
- The appliance must be installed at least 10 cm away from any wall or enclosure, and it must not
come into contact with any object or enclosure.
Type of gas
Country
BE, CH, CY, CZ, ES,
G30/G31
FR, GB, GR, IE, IT, LT,
LU, PT, SI; SK, TR
BE, CY, DK, EE, FI, FR,
G30/G31
GB, HU, IT, LT, NL,
30mbar
NO, PL, RO, SE, SI,
TR
G20/G25
BE, FR
20/25mbar
AT, CH, CY, CZ, DK,
G20
EE, ES, FI, GB, GR,
HR, HU, IE, IT, LT, LU,
LV, NO, PT, RO, SE,
20mbar
SI, SK, TR
G20
DE, PL, RO
20mbar
G20
NL
20mbar
G20
DE
20mbar
Opening of the
Injector
air collars
marking
(L1)
7 (±1) mm
120
7 (±1) mm
120
7 (±1) mm
180
7 (±1) mm
180
7 (±1) mm
180
7 (±1) mm
180
7 (±1) mm
180
- 23 -
By-pass
Rated
mark
consumption
(Adjustment)
G30 : 394 g/h
55 (+0.5 tour)
G31: 388 g/h
G30 : 394 g/h
55 (+0.5 tour)
G31: 388 g/h
G20 : 529 l/h
55
(+ 1.75 tours)
G25 : 615 l/h
55
G20 : 529 l/h
(+ 1.75 tours)
55
G20 : 529 l/h
(+ 1.75 tour)
55
G20 : 529 l/h
(+ 1.75 tour)
55
G20 : 529 l/h
(+ 1.75 tour)
Reduced
power
2.8kW
2.8kW
2.8kW
2.8kW
2.8kW
2.8kW
2.8kW

Publicité

Table des Matières
loading

Table des Matières