Vega Securo Instructions D'emploi page 21

Translation Operating instructions – Safe
Door is locked.
Viewing the opening log
Activate administrator mode.
Ü
Enter operating code 09.
Ü
Confirm with the ENTER button. Date of the last opening is displayed.
Ü
Press key 6. Time and display of the opening mode of the last opening are
Ü
displayed.
Display
1
8
9
Other opening logs can be displayed:
Button
2 Date previous opening
8 Date next opening
5 Date last opening
CANCEL Exit mode
7.3 Faults/troubleshooting
Have any malfunctions of the appliance repaired exclusively by qualified person-
Ü
nel.
Resetting the administrator code
If you forgot the administrator code, it is possible to reset the code to factory setting.
To reset the administrator code:
Open the safe with the master key or the guest code.
Ü
Remove the back cover of the door (with 3 screws).
Ü
Press and hold the RESET button on the operating panel for about 7 seconds.
Ü
The display shows RESET.
Release button.
Ü
Re-install back cover.
Ü
19
Opening mode
Administrator code
Guest code
Main key
6 Time and mode of opening
6 Time and mode of opening
6 Time and mode of opening