Vega Securo Instructions D'emploi page 20

Translation Operating instructions – Safe
7.2 Administrator mode
The administrator mode is intended exclusively for personnel.
Make sure that the administrator code is accessible exclusively to personnel.
Ü
In administrator mode, it is possible to
open the safe
è
change the administrator code.
è
view the access protocols.
è
set the date and time.
è
Activate administrator mode
Press the CANCEL button 2x in direct sequence.
Ü
The display shows SUPER.
Enter the administrator code.
Ü
Confirm with the ENTER button.
Ü
Administrator mode is activated.
i
After entering a wrong code three times in a row, entering the code again is only
possible after waiting about 5 minutes.
Changing the administrator code
Activate administrator mode.
Ü
Enter operating code 01.
Ü
Confirm with the ENTER button.
Ü
The display shows NEW.
Enter a new administrator code (6 digits).
è
Confirm with the ENTER button.
Ü
The display shows REPEAT.
Re-enter new administrator code.
è
Confirm with theENTER button.
Ü
The display shows GOOD.
Administrator code has been changed.
Opening the safe
Activate administrator mode.
Ü
Enter operating code 00.
Ü
Confirm with the ENTER button.
Ü
Door opens.
Closing the safe
Close the door.
Ü
Press the ENTER button.
Ü
18