Fein Grit GIB Mode D'emploi page 10

en
10
Operating conditions
GI150 mounted on GIBE
Speed (rpm)
Material
Dimension
Grinding belt
REMARK: The sum of the measured emission value and
respective measuring inaccuracy represents the upper
limit of the values that can occur during measuring.
Wear hearing protection!
Measured values determined in accordance with the cor-
responding product standard (see last page in this Instruc-
tion Manual).
Repair and customer service.
Repairs may be carried out only by qualified per-
sons in conformity with the valid regulations.
For repairs, we recommend our FEIN customer service
centre, the FEIN authorised service centres and FEIN
agencies.
GIBE: When the machine's power supply cable is dam-
aged, it must be replaced using a specially prepared
power supply cable, available from your FEIN customer
service agent.
The current spare parts list of this product can be found
on the Internet under www.fein.com.
Carry out the following maintenance regularly:
Empty the collection box and clean the filter inserts.
Replace the filter inserts in good time when the extrac-
tion performance decreases considerably.
Remove any deposits in the housing.
Clean moving parts of the rest (2) using compressed air.
Warranty and liability.
Idle Sanding
The warranty for the product is valid in accordance with
the legal regulations in the country where it is marketed.
In addition, FEIN also provides a guarantee in accordance
3000 3000
with the FEIN manufacturer's warranty declaration.
– ST37 The delivery scope may include only a part of the acces-
sories described or shown in this instruction manual.
– 8 x 40
GRIT by Fein
Declaration of conformity.
– 36R
FEIN declares itself solely responsible for this product
conforming with the relevant provisions given on the last
page of this Instruction Manual.
Technical documents at: C. & E. Fein GmbH,
C-D1_IA, D-73529 Schwäbisch Gmünd
Environmental protection, disposal.
Packaging, worn out machines and accessories should be
sorted for environment-friendly recycling.
Connection diagrams.
Type GIBE Page 60