Declaration Of Conformity - Epson ET-2650 Guide Rapide

Caution: Do not touch the flat
white cable or the ink tubes and
their translucent cover, or you
may damage your product.
Solving Network Problems
If you have a network problem with your Epson
LCD screen to diagnose the cause of most problems.
You can also check the basic troubleshooting suggestions below. For more in-depth
troubleshooting, see your online User's Guide or FAQs at www.epson.com/support (U.S.)
or www.epson.ca/support (Canada).
■
Try connecting to the wireless router or access point with your computer or another
device to confirm that it is working correctly.
■
Try restarting the router (turn it off and then on), then try to connect to it again.
■
Verify that the network settings are correct and check the signal strength. If it is poor,
try moving the product closer to your router or access point.
■
When using TCP/IP, make sure your network's DHCP option is enabled (your router
manufacturer will be able to assist you with this setting).
■
Print a network status sheet from the product's control panel. Press
and select
Setup > Network Settings > Print Status Sheet.
button.
■
Remove and reinstall your product software.
Notices

Declaration of Conformity

According to 47CFR, Part 2 and 15 for: Class B Personal Computers and Peripherals; and/or CPU
Boards and Power Supplies used with Class B Personal Computers:
We:
Located at:
Telephone:
4
Solving Network Problems
Epson America, Inc.
3840 Kilroy Airport Way, MS 3-13, Long Beach, CA 90806
(562) 981-3840
®
product, check the messages on the
Then press the x
, if necessary,