Zyxel PLA-401 Serie Guide De Démarrage Rapide page 6

Set Up a HomePlug AV Powerline
Network
There are two ways to secure your powerline network.
• If your other powerline devices have ENCRYPT buttons, go to
Up a Powerline Network with ENCRYPT
• If your other powerline devices do not have ENCRYPT buttons, see
the User's Guide for instructions on using the PLA-4xx
Configuration Utility to set up your secure Powerline network.
Set Up a Powerline Network with ENCRYPT
Use the ENCRYPT button to set up a secure connection between two
PLA-401 Seriess or with another ENCRYPT-enabled device.
The PLA-401 Series only works with another device with the same
firmware version as its own.
Use the ENCRYPT feature on two devices at a time.
1. Place the powerline devices close to each other, as you only have two
minutes to press the ENCRYPT buttons on both devices. You can
disconnect the devices from your computer or modem (or other
networking equipment) if you need to, but the powerline devices need
to be plugged into power outlets.
2. Press the ENCRYPT button at the rear of both of your devices for
10~15 seconds. This sets up a random network name.
6
section.
Set