Dell W2600 Mode D'emploi page 18

4
Replace the back cover.
5
Plug in the power cords for the TV and devices and turn them on.
Enter the OSD and select DVI. See "Input Select Menu" on page 26.
6
Using VGA (PC Analog)
You can use your TV as a computer monitor using a VGA connector
NOTE:
Only one connector can be used for a computer, either VGA or DVI.
1
Turn off the TV and unplug the power cord.
2
Remove the back cover from the TV by pulling the cover toward you and lifting it away.
.
Setting Up Your TV
19