Festo MTR-AC-40-3 S Série Notice D'utilisation page 26

MTR−...
In combinations with a drive shaft vertical to the longitudinal axis of the liner drive:
2. Place the centring disc (B) in the central
recess (A).
3. Mount the connecting elements coupling
hub (E), ring gear (G) and coupling hub
(H), at the same time observing dimen
sion s.
Rated coupling size
[mm]
4. Screw in the locking screws (F) and (I), but do not tighten yet.
5. Clean the drive shaft of the axis. The coupling will only grip without slipping on
a shaft pin which is dry and free of grease.
6. Push the prefitted coupling (K) as far as possible onto the drive shaft.
26
Dimension s [mm]
30
40
65
A
B
Fig. 7
Fig. 8
35
66
90
Fig. 9
F
E
G
H
Ó Ó
Ó Ó Ó Ó
Ó Ó
Festo MTR−... 0506d English
I