beautyrest Advanced Motion Base Manuel Du Propriétaire page 11

installation guide
STEP 7
Carefully flip the base over on to its legs. Important: Two people are
required to move the bed base. Do not drag across the floor. Do not
rest frame on its side, excessive pressure may damage the legs.
STEP 8
Plug the power cord into a power source.
A surge protector is recommended.
STEP 9
Quickly test remote functions to verify proper setup
before placing mattress on base. Return the base to a flat
position before placing the mattress on top.
For customer support, visit www.ergomotion.com or call: 1-888-550-3746
STEP 10
Install mattress retainer bars by inserting each end of the retainer
bar into the holes at the foot of the platform.
Setup is now complete! Test all functions on remote.
9