Regalo 1185 Guide D'utilisation page 12

Operating the Door Latch
STEP 1
Use your thumb or forefinger to
pull back on the thumb lock. This
action will release the locking pin
THUMB LOCK
below the metal saddle that joins
the door and the gate frame.
STEP 2
With the thumb lock pulled back,
lift up on the entire door panel,
raising the gate high enough
for the upper and lower metal
saddles to clear free of their
counterparts. Your gate door
should now be free to fully open.
To close the gate, simply repeat
STEPS 1 – 2 in reverse.
NOTE: If your latch is not properly engaging, ensure that your gate is level,
mounted properly, and that you have not over-tightened the threaded
spindle rods.
12 English