Cleaning & Maintenance - NOSTALGIA PRODUCTS Kegorator KRS2100 Serie Manuel D'instructions

CLEANING & MAINTENANCE
To prevent the buildup of yeast, mold and bacteria, it's recommended that you clean your
KEGORATOR™ every time you switch a keg or every five weeks, whichever is shorter.
NEVER use an abrasive sponge, cloth or scouring pad on this appliance.
Clean Beer Lines
For best results, we recommend purchasing a beer line cleaning kit. There
are several different methods for cleaning beer lines, including hand pump
cleaning kits, pressurized cleaning kits, and recirculating cleaning pumps.
Follow the directions included in each kit to clean your KEGORATOR™.
Clean Tap Tower Spigot
As beer residue left behind on the Tap Tower Spigot evaporates, it leaves behind sticky
sugars that can make the handle hard to pull. To avoid this, remove clean the Tap Tower
Spigot after every use.
IMPORTANT! Be sure to untap your keg before removing the Tap Tower Spigot.
1. Remove the Spigot Handle, then use the Tap Tower Wrench to
remove the Tap Tower Spigot. Be sure to not lose the interior
spring when removing the Tap Tower Spigot.
NOTE: The Tap Tower Spigot has a reverse thread and can be
removed by turning clockwise.
2. Wash the Spigot Handle, Tap Tower Spigot
and interior spring in hot, soapy water. Allow
parts to dry before reassembling.
When Unit Is Not In Use
Adjust the temperature gauge to MIN, especially when in colder environments as this unit
does not self-defrost and ice may build up inside the unit.
NOTE: To avoid permanent damage to the unit, never use
sharp objects to remove built up ice inside the unit.
15
Tap Tower
Spigot
Spigot Handle
Spring