Attaching Coupler To Tap Tower; Installing The Guardrail / Drip Tray - NOSTALGIA PRODUCTS Kegorator KRS2100 Serie Manuel D'instructions

ATTACHING COUPLER TO TAP TOWER

1.
Remove & discard
Insert (rounded
side down)
Remove the packing spring and Backflow
Stopper from inside the Keg Coupler,
then reinsert the Backflow Stopper into
the Keg Coupler (rounded side down).
3.
After the Tap Tower has been placed
on top the cabinet and the hose line
feeds through the bottom, attach
the wing nut to the Keg Coupler.

INSTALLING THE GUARDRAIL / DRIP TRAY

1. Place the Guardrail on top of the unit
and align all pegs of the Guardrail
with the holes on top of the unit.
2. Secure the Guardrail to the unit by pushing
the pegs inside the corresponding holes.
3. Place the Drip Tray at the base of the Tap Tower.
2.
Place the Top Coupler Washer flush and
centered on the top of the Keg Coupler.
Tap Tower
Assembly
Guardrail
Tap Tower
Handle
Drip Tray
10