EN
5 - CONNECTION AND SET UP
OPERATION WITH 1 FAN
Connect thermal probe to NTC port. Connect fan to port OUT1 using the 3.5mm jack wire included with
your fan.
OPERATION WITH 2 FANS
Connect thermal probe to NTC port. Connect fans to ports OUT1 and OUT2 using the 3.5mm jack wires included
with your fans.
OPERATION WITH 3 FANS
Connect thermal probe to NTC port. Connect fans to ports OUT1, OUT2 and OUT3 using the 3.5mm jack
wires induded with your fans.
OPERATION WITH 4 FANS
Connect thermal probe to NTC port. Connect fans to ports OUT1, OUT2, OUT3 and OUT4 using the
3.5mm jack wires included with your fans.
15