Eldes EWKB4 Mode D'emploi page 12

1st character for STAY-arming
1st character for violated zone bypass and bypassed
zone activation
1st character for Configuration mode activation or
deactivation
1st character for system fault list indication /
1st character for violated high-numbered zone
indication / 1st character for violated tamper
indication (only for ESIM364 and ESIM384) / 1st
character for violated high-numbered tamper
indication (only for PITBULL ALARM and PITBULL
ALARM PRO)
Command typing
0
9
Keypad partition switch (if enabled; only for
1 2
ESIM364* and ESIM384)
1st character for Configuration mode activation or
deactivation (only for ESIM364**) / clear typed in
*
characters
Typed in command confirmation
* ESIM364 v02.16.00 and up ** ESIM364 up to v02.06.20
INDICATION
Steady ON
(red)
Flashing
Steady ON
(green)
Steady ON
(orange)
Flashing
Steady ON
(orange)
1-12
Steady ON
(red)
12 EN
DESCRIPTION
DESCRIPTION
System armed / exit delay in
progress
Configuration mode activated
System is ready – no violated zones
and/or violated tampers exist
System faults exist
Violated high-numbered zone
Violated zone bypassed
Zone violated / configuration
command being typed in
WIRELESS LED KEYPAD EWKB4