Introduction And Planning - Chore-Time W1000C1-CT Manuel D'utilisation

INTRODUCTION
Congratulations on your purchase of the Chore-Time Feeder Cable Winch. This winch stands alone in the market as the
fastest and most robust winch of its kind. The installation of a Chore-Time Feeder Cable Winch ensures extreme longevity
and trouble free operation.
PLANNING
The Direct Drive Cable Winch is designed to be installed inside livestock buildings to lift feeder and drinker lines (and other
similar systems) between the ground level and ceiling space.
The Direct Drive Cable Winch features a single phase motor coupled to a drive system comprising two cam activated limit
switches to allow stopping at the fully lowered and raised positions.
Suitable controls will be required to switch the motor direction and accept the limits switch inputs.
HANDLING
Ensure you wear personal protection equipment (proper clothing, gloves, dust masks). Never use your hands at dangerous
locations (eg cables, sharp edges etc). In order to safely lift the Direct Drive Cable Winch, use an approved M12 or 1/2"
lifting eye or strap as shown below:
Use a suitably rated lifting strap as shown to
allow lifting into the proximity of the final
mounting location

INTRODUCTION AND PLANNING

6
Use an M12 or 1/2" lifting eye as
shown to allow lifting into the proximity
of the final mounting location
When using the lifting strap method, be
aware that the winch may not hang in a
balanced orientation.