Setting The Camera - Niko 10-490-03 Mode D'emploi

10-490-03 10-490-03

5. SETTING THE CAMERA

You can adjust the settings of the camera in the On Screen Display menu of the internal video unit.
1. Connect an internal video unit with On Screen Display to the installation.
2. Activate the image on the internal video unit by pressing on the image button.
3. Press on the joystick of the camera to see the OSD menu.
4. Choose SAVE ALL below to save the setting.
Adjust values according to the
parameters
You can adjust the following settings in the menu:
Menu function
1 LANGUAGE (language)
2 SHUTTER / AGC
(automatic image
enhancement)
3 BACKLIGHT (backlight
compensation)
25
Open
Confirm
Choice
English (standard)
AUTO (standard)
off
BLC
HLC
OFF
List
up - down
Use to
adjust the language
capture dark conditions
to correct too much image breakdown
to dim the light source so that objects remain
recognisable against backlight
to darken very light detection ranges so that objects
are easily recognisable in close proximity to the
light source
to switch off backlight compensation
ENG