Niko 10-490-03 Mode D'emploi page 21

10-490-03 10-490-03
Read the complete manual before carrying out the installation and activating the system.
1. DESCRIPTION
The surface-mounting camera for outdoor use from the Niko Access Control range is always part of an installation which contains one or more
internal video unit(s) and one power supply. You can integrate the surface-mounting camera into the installation as a stand-alone device or in combination
with an external audio unit.
You can also expand the installation with more cameras by using a video switcher.
The surface-mounting camera can be rotated both horizontally and vertically and is suitable for variable weather conditions. This colour camera is equipped
with a varifocal lens. Infrared LEDs ensure better visibility at night.
The video transmitter (supplied with the camera) (10-498) is supplied with power from the bus and converts the camera signal to a signal that can
be transmitted over a twisted cable.
2. COMPONENTS
➍
The product packaging contains the following components:
surface-mounting camera with protection cap and mounting bracket
•
video transmitter (10-498)
•
video-connecting cables
•
hexagonal key
•
mounting screws
•
21
➊
➋
➌
➊
Adjustment screw for orientation
➊
Protection cap
➌
Socket anchor
➍
Video transmitter(10-498)
ENG