Livall BH6X Guide De L'utilisateur page 5

Connecting for the first time or switching devices
remote controller keys.)
One helmet can be connected to up to three LIVALL-authorized devices at the same time. After the handlebar
remote control is connected, press the "left" or "right" button to control the helmet's corresponding indicator light.
1. Connecting for the first time
2. Replacing device
Place a device that is already ON
near the helmet's main control.
(Please refer to specific functions of the helmet when using the
≤5m
Turn on the device, which should
be within 5 meters of the helmet.
It will automatically connect the
helmet.
Two "beeps"
When the warming light flashes
and the helmet speakers emit two
"beeps", it indicates that there is a
device nearby requiring connection
to the helmet.
(The helmets without
Bluetooth speakers could not hear
such voice prompts.)
Two "beeps"
After the connection is established, it
will be confirmed with two "beeps".
(The helmets without Bluetooth
speakers could not hear such voice
prompts. Please check the taillight to see
if the helmet is connected successfully.)
" □ " function button
Press the " □ " button on the helmet
within 10 seconds after you hear
the beeps and confirm connection
to the device.When pressing the
arrow left or right key on the bling
jet remote, the right or left turning
signal appears.
4