Livall BH6X Guide De L'utilisateur page 4

IV. Operating Instructions
Bluetooth speakers. The helmets without Bluetooth speakers could not take & make calls, listen to music and hear voice prompts.)
Start-Up
" □ " function button
Press the " □ " button for
3-to-5 seconds
Change the language of the voice
prompt
(the default language is English)
To switch the language of the voice
prompt, follow the procedure
below when in normal standby
mode and disconnected from a
phone(currently only English and
Chinese are supported).
3
(Please charge the battery before use.Some models of helmets are not equipped with
POWER ON
You will hear a voice saying
"POWER ON".
" < " button
First hold the "<" button
This device is successfully
powered up when the rear lights
come on.
" < " button " > " button
Then press the ">" button to
switch between languages.