Charging Up The Battery; Use - nah-Vital D25-NM001 Guide

CHARGING UP THE BATTERY

Please Note!
■ Do not charge up on a computer because the computer
might be damaged by the high charging current.
If the device (1) cannot be switched on, the control lamp (11)
on the device lights up red or the remote control (4) does not
work, the battery is too weak and needs to be charged.
To connect the device to the plug socket, a USB mains adapter
(5 V and ≥1 A; not supplied with the device) is required.
1. First plug the USB cable into the USB socket (10 or 14) and
then connect to a power source with USB interface (prefer-
ably via a USB mains adapter to the plug socket).
The charging process begins and the control lamp on the
device or on the remote control lights up red.
2. As soon as the control lamp on the device lights up blue
or the one on the remote control goes out, the battery is
charged.
Disconnect the USB cable from the power source and then
from the USB socket.

USE

EMS stands for electrical muscle stimulation. The basic device
is used to stimulate the neck muscles. In addition, you can use
the EMS pads (3) to treat the muscles of the abdomen, legs,
arms, back or buttocks.
Beginners should treat one muscle group for no more than
15 minutes a day to prevent overstimulation!
EN
33