Remington TouchTech Beard Trimmer MB4700 Mode D'emploi page 5

PARTS
1. Adjustable beard comb
2. Main blade
3. Display
4. Charge/profiles indicator
5. Travel lock
CHARGING
Charge the device:
• Before using for the first time.
• When only one charge indicator bar is showing.
• After the device has not been used for a long time.
1. Ensure that the travel lock is in the unlocked position and the device is not running.
2. Connect the charging adapter to the power connector and then to the mains power
outlet.
3. When charging, the four charge indicator bars will light up one after the other. When
charging is complete, all four indicator bars will be lit.
4. A first time charge should take approximately 4 hours. Top up charges should take
approximately 2 hours.
• To preserve the life of your batteries, let them run out every 6 months then recharge for
4 hours.
NOTE: If this is the first time you have charged the device, or if it has not been charged in a
long time, the display may not turn on immediately when charging.
USB CHARGING VIA PC
1. Ensure that the travel lock is in the unlocked position and the device is not running
2. Connect your USB cable to the USB port on the PC.
3. Connect the USB cable to device.
• When charging the digital display will illuminate.
NOTE: If this is the first time you have charged the unit, or if it has not been charged in a long
time, the display may not turn on immediately when charging.
CORDED/CORDLESS USE
• When fully charged, your trimmer should provide approximately 50 minutes of cordless
use.
• You can also connect the charger (as if you were going to charge your trimmer) and
operate your trimmer 'corded' if desired.
6. On/off button
7. Charger connector
8. Charging adapter (not shown)
9. Cleaning brush (not shown)
10. USB charging cable (not shown)
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
5