Getting Started; Safety Information - LG ESS Home 10 Mode D'emploi

Masquer les pouces Voir aussi pour ESS Home 10:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2

Getting Started

Safety Information

IMPORTANT : ThIs PROducT shOuld NOT be used fOR ANy PuRPOse OTheR ThAN The
1
PuRPOse descRIbed IN ThIs INsTAllATION MANuAl.
WARNING
y There is high possibility of electric shock or serious burns due to the high voltages in power
conditioning circuits.
y High voltages on AC and DC cables. Risk of death or serious injury due to electric shock.
y A potentially hazardous circumstance such as excessive heat or electrolyte mist may occur due to
improper operating conditions, damage, misuse and/or abuse.
y This product have potential danger such as death or serious injury by fire, high voltages or
explosion if appropriate precautions are not read or fully understood.
y Do not place flammable or potentially explosive objects near the product.
y Do not place any kind of objects on top of the product during operation.
y All works on the PV modules, power conditioning system, and battery system must be carried out
by qualified personnel only.
y Electrical installations must be done in accordance with the local and national electrical safety
standards.
y Wear rubber gloves and protective clothing (protective glasses and boots) when working on high
voltage/high current systems such as PCS and battery systems.
y There is a risk of electric shock. Do not remove cover. There is no user serviceable parts inside.
Refer servicing to qualified and accredited service technician.
y Electrical shock hazard. Do not touch uninsulated wires when the product cover is removed.
y In the event of fault, the system must not be restarted. Product maintenance of repairs must be
performed by qualified personnel, or personnel from an authorized support center.
y If the connected batteries are not LG battery, not only the batteries but also the PCS is not
guaranteed by LG Electronics.
CAUTION
y This product is intended for residential use only and should not be used for commercial or
industrial.
y Before testing electrical parts inside the system, it takes at least 10-minute standby period of
time to complete discharging the system.
Indicates a potentially dangerous situation. death or serious
injury may result if appropriate precautions are not taken.
Indicates a situation where damage or injury could occur. If
it is not avoided, minor injury and/or damage to property
may result.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ess home 8D010ke1n211D008ke1n211

Table des Matières