Restore Factory Settings (Reset) - Seca 959 Mode D'emploi

Restore factory settings
76 •
3. Select an attenuation level.
4. Confirm the selection.
You will leave the menu automatically.
You can restore the factory settings for the following
(RESET) functions:
Autohold (Ahold)
Acoustic signal (Press)
Acoustic signal (Hold)
Attenuation (Fil)
Autoclear (Aclear)
Pre-Tare (Pt)
Height for body mass index
(BMI)
Wireless module (SYS)
Autosend (ASend)
Autoprint (APrt)
1. Select the item "Reset" in the menu.
2. Confirm the selection.
You will leave the menu automatically.
3. Switch the scales off.
The factory settings are restored and will be availa-
ble when the scales are next switched on.
– 0: no attenuation
– 1: moderate attenuation
– 2: high attenuation
Function
NOTE:
The wireless module is switched off when
restoring the factory settings. Data for existing
wireless groups remains in the memory. These
groups do not need to be set up again.
Factory setting
depending on
model
off
on
0
depending on
model
0 kg
170 cm
off
off
off