Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
COMMUNICATION PROTOCOL RS-232
To control the equipment via the RS-232 port it is recommended that you use Windows Hyperterminal or
similar applications, using a straight-through RS-232 cable for connection. The program must be configured
using the following values:
-
Select the corresponding COM port, click on Configure and set the following values:
- Bits per second: 9600
- Data bits: 8
- Parity: none
- Stop bits: 1
- Flow control: none
-
It is recommended that you set the following values in File/Properties/Configuration/Configuration ASCII.
Send line ends with line feeds
Echo typed characters locally
Append line feeds to incoming line ends
COMMAND
COMMAND
FF 06 8D 93
FF 06 0D 13
FF 06 8E 94
FF 06 0E 14
FUNCTION
ON
Assign MONITOR
to ZONE 1
OFF
ON
Assign MONITOR
to ZONE 2
OFF
COMMAND
MONITOR
FF 06 8F 95
FF 06 0F 15
FF 06 90 96
FF 06 10 16
- 8 -
FUNCTION
ON
Assign MONITOR
to ZONE 3
OFF
ON
Assign MONITOR
to ZONE 4
OFF
Publicité
Table des Matières
