Assembly - EGO POWER+ SNT2110 Guide D'utilisation

ASSEMBLY

WARNING:
injury, always remove the battery pack(s) from the tool when assembling parts.
WARNING:
until the parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
recommended for use with this product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to serious injury.
UNPACKING
◾
Grasp the rear handle and the front part of the product at the same time to
carefully lift the tool up and out of the carton. Remove any other accessories from
the carton. Make sure that all items listed in the packing list are included.
WARNING:
assembled to your product when you unpack it. Parts on this list are not assembled to
the product by the manufacturer and require customer installation. Use of a product
that may have been improperly assembled could result in serious personal injury.
◾
Inspect the product carefully to make sure that no breakage or damage occurred
during shipping.
◾
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
◾
If any parts are damaged or missing, please return the product to the place of
purchase.
LIST OF CONTENTS
PART NAME
Snow Blower
Discharge Chute
Operator's Manual
Hex Wrench
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2110/SNT2110-FC
To prevent accidental starting that could cause serious personal
If any parts are damaged or missing, do not operate this product
Do not attempt to modify this tool or create accessories not
Do not use this product if any parts on the packing list are already
QUANTITY
1
1
1
1
13