Parts & Assembly - NOSTALGIA PRODUCTS CICM2WB Instructions Et Recettes

PARTS & ASSEMBLY
Parts
Electric
Motor
ON/OFF Dial
Candy
Crusher
Mixing
Paddle
Ice Cream Maker Assembly
1. Place the Electric Motor on a stable surface near an electrical outlet.
2. Set the Bucket onto the Electric Motor. Make sure the feet and star-shaped gear on
the bottom of the Bucket align with the indentations on top of the Electric Motor.
3. Place the Canister into the center of the Bucket onto the star-shaped gear.
4. Set the Dasher into the center of the Canister.
5. Insert the notches on the Canister Brace into the notch openings
on the top of the Bucket to secure the Canister Brace.
Candy Crusher Assembly
1. Place the Mixing Paddle into the Blade Chamber.
Place the Lid onto the Blade Chamber by aligning the
notches on the Lid with the notch openings on the
Blade Chamber, and secure by twisting clockwise.
2. Attach the Handle to the center post of the Mixing Paddle.
3. Place the assembled Candy Crusher into the
center of the Canister Brace. Twist clockwise to
secure the notches on the Candy Crusher with the
notches on the Canister Brace (see figure 1).
5
Bucket
Blade
Chamber
Handle
Lid
Canister
Canister
Brace
Cord Storage
(figure 1)
Notches
Dasher