FIBARO Home Center Lite Mode D'emploi page 13

Add devices
After creating the rooms you can start
adding the devices.
Rooms Devices Scenes
Select "Devices" from the main menu.
Select the "Add or remove device" option from the
left side menu. Click "Add" to start adding a new
device (learning mode).
Add or remove device
The timer will count down the time (30 sec by
default) for you to add a new device to the Z-Wave
network (inclusion).
Note that the device needs to be located within
direct range of the Home Center Lite during the
inclusion process.
Please refer to each device's manual for further
information on how to include it into the Z-Wave
network.
NOTE:
Danger of electrocution! If you are not sure how
to connect a device to the wires, please contact
a qualified installer.
13