Fermax PROXIMIDAD MDS - AC+ Manuel D'installation page 6

- PC with Desfire Security Programmer software.
- Desktop programmer to encrypt readers, encrypt cards and read
card identifiers.Part number F04534.
- Desktop reader to read the card identifiers.Part number F04533.
In this operating mode the cards are activated on the chosen central
unit, therefore capacity will depend on this.
Once activated, you can use them to open the relevant access door.
To this end, it is simply necessary to swipe (momentarily approximate)
the card/keyfob to the proximity reader.
As it operates on a radio frequency, no physical contact is necessary,
meaning you can even swipe the card without taking it out of your
wallet. The maximum reading distance is 2 cm.
For more details on encryption, see manual 970210 Desfire Software.
The proximity reader has various light indicators, the meaning of which
is the following:
+
-
PROXIMITY ACCESS CONTROL
Swiping a registered card by the reader
the door will open and the green led
will light up. A confirmation «beep» will
be emitted.
Pag 6
Beep! Beep
+
-
+
-
PROXIMITY ACCESS CONTROL
Swiping an unregistered card by the
reader the door will not open nor will the
green led light up. A «double beep» will
be emitted indicating that access has
been denied.
Beep!
Beep!
+
-