Commissioning, Measuring, Calibration; Storage - Xylem WTW ADA S7/IDS Mode D'emploi

ADA S7/IDS
Commissioning
Calibration
and measurement
ba75899e02 12/2017

Commissioning, measuring, calibration

Connect the S7 plug-in connector of the pH electrode with the S7 plug
of the adapter.
Note
The further commissioning steps are given in the operating manual of
the pH electrode.
 Connect the electrode to the meter.
 Calibrate the electrode according to the operating manual of the me-
ter and observe the following rules while doing so:
Connect the adapter with the pH electrode to the meter. All further
details are given in the operating manuals of the pH electrode and
meter.
Caution: Heed the depth of immersion of the pH electrode. The
ADA S7/IDS adapter must not be submersed!

Storage

For storage, leave the adapter plugged on the pH electrode if you do
not intend to use both devices otherwise. The storing method depends
on the pH electrode. More details are given in the operating manual of
the pH electrode.
13