Dion-Ag F6313T955 Instructions D'assemblage page 7

Instructions d'installation / Installation instructions : F6313T955
Ensemble Adaptateur F63 / Adapter Kit F63: K27760 for Claas
Step 4: Installation of the lower links

Install the two lower links in the lowest position on the header frame using 1/2" x 1"
flange bolts. Do not install bolts in position (7), Do not tighten immediately.

Slide the hexagonal shaft (8), the cook (9) & short lever (11). Lock in place with the
spring pins (10).

Install the lock handle (21) by tightening the 1/2" x 2" hexagonal bolt (18) with two
flange nuts (19). Leave enough play to allow the handle to rotate smoothly.
14 avril 2014
TM
harvesters
7