Technical Specifications - EuroLite T-36 Pinspot Mode D'emploi

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The interior of the device should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the lamp. Maintenance and service operations
are only to be carried out by authorized dealers.
Please refer to the instructions under "Installing/Replacing the lamp".
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

T-36 Pinspot:
Power supply:
Power consumption:
Weight:
Dimensions (LxWxH):
Fitting lamp:
Maximum ambient temperature ta:
Maximum housing temperature tB (steady state):
Colour-wheel with motor:
Power supply:
Power consumption:
Rotation speed:
Colours:
Diameter:
Weight:
Accessory:
GE 4515 PAR-36 6,4V/30W VNSP 100h
OMNILUX PAR-36 6.4V/30W G53 VNSP 200h
GE 4511 PAR-36 6.2V/30W WFL 300h
GE H4515 PAR-36 6V/30W halo 100h
Please note: Every information is subject to change without prior notice. 04.06.2005 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
230 V AC, 50 Hz ~
30 W
1 kg
150 x 120 x 115 mm
6 V/30 W PAR-36
45° C
100° C
230 V AC, 50 Hz ~
4 W
ca. 4 RPM
Red, green, yellow, blue
23 cm
0.1 kg
No. 88061000
No. 88061005
No. 88061200
No. 88062000
17/32 50800530_V_1_1.DOC