Inserting A P2 Card - Panasonic AU-XPD1 Mode D'emploi

Inserting a P2 Card

1
Insert a P2 card in the P2 card slot.
Press in the card until the EJECT button
pops up.
◆ NOTE:
• Be sure to insert the P2 card
horizontally. Forcing the card in at an
angle may damage it.
• Do not remove a P2 card while it is
being accessed or right after insertion.
Otherwise, the card may be damaged.
• Do not transport the drive with a P2 card
inserted. Otherwise, the P2 drive may be
damaged.
2
Fold the EJECT button in the
direction of the arrow.
◆ NOTE:
• Do not use the P2 drive with the EJECT
button fully extended. Otherwise, the
EJECT button could be damaged.
EJECT button
E-10