Channel Menu; Manual Store - Samsung 4 Serie Mode D'emploi

Masquer les pouces Voir aussi pour 4 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Basic Features

Channel Menu

Retuning channels
¦
Antenna (Air / Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Country
The PIN input screen appears. Enter your 4 digit PIN number.
Digital Channel
: Change the country for digital
channels.
Analogue Channel
: Change the country for analogue
channels.
Auto Store
Scans for a channel automatically and stores in the TV.
Automatically allocated programme numbers may not
correspond to actual or desired programme numbers. If
a channel is locked using the Child Lock function, the
PIN input window appears.
Antenna Source (Air / Cable)
source to memorise.
Channel Source (Digital & Analogue / Digital /
Analogue): Select the channel source to memorise.
When selecting Cable → Digital & Analogue or Digital:
Provide a value to scan for cable channels.
Search Mode (Full / Network / Quick): Scans for all
channels with active broadcast stations and stores them
in the TV.
If you set
Quick, you can set up Network,
Network ID, Frequency, Modulation, Symbol
Rate manually by press the button on the remote
control.
Network (Auto / Manual): Selects the Network ID
setting mode among Auto or Manual.
Network ID: When Network is Manual, you can set up
Network ID using the numeric buttons.
Frequency: Displays the frequency for the channel.
(differs in each country)
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
12
English
: Select the antenna

Manual Store

Scans for a channel manually and stores in the TV.
If a channel is locked using the
the PIN input window appears.
Digital Channel
: (available in DTV mode) When
scanning has finished, channels are updated in the
channel list.
When selecting
Antenna → Air: Channel, Frequency,
Bandwidth
Antenna → Cable: Frequency,
When selecting
Modulation, Symbol Rate
Analogue Channel (Programme, Colour System,
Sound System, Channel, Search): If there is abnormal
sound or no sound, reselect the sound standard
required.
Channel mode
x
P
(programme mode): When tuning is complete,
the broadcasting stations in your area have been
assigned to position numbers from P0 to P99. You
can select a channel by entering the position number
in this mode.
x
C
(aerial channel mode) / S (cable channel mode):
These two modes allow you to select a channel
by entering the assigned number for each aerial
broadcasting station or cable channel.
Editing channels
¦
Channel Manager Option Menu
(in Channel Manager)
1. Select a channel and press the
2. Edit the channel name or number using the Edit
Channel Name or Edit Channel Number menu.
Edit Channel Name
your own channel name.
Edit Channel Number
number by pressing the number buttons desired.
Other Features
¦
Cable Search Option
(depending on the country)
Sets additional search options such as the frequency and
symbol rate for a cable network search.
Freq.Start / Freq.Stop
(differs in each country)
: Displays available modulation values.
Modulation
: Displays available symbol rates.
Symbol Rate
Child Lock function,
TOOLS
button.
(analogue channels only): Assign
(digital channels only): Edit the
: Set the start or stop frequency

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Le26c450Le32c450

Table des Matières