AirKing AK912 Mode D'emploi

IMPORTANT INSTRUCTIONS -
: AK912, AK922
Models
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT
YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
electric shock and injury to person, including the following:
1. Read all instructions before installing or using unit.
2. Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer.
3. Before servicing or cleaning the unit, switch power off at
service panel and lock the service disconnecting means to
prevent power from being switched on accidentally. When
the service disconnecting means cannot be locked, securely
fasten a prominent warning device, such as a tag, to the
service panel.
4. Installation work and electrical wiring must be done by
qualified person(s) in accordance with all applicable codes
and standards, including fire-related construction.
5. When cutting or drilling into wall or ceiling, do not damage
electrical wiring and other hidden utilities.
210575912 Rev. A 1-06
OPERATING MANUAL
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
SAVE THESE INSTRUCTIONS
6. This unit must be grounded.
WARNING:
A SHOWER STALL ENCLOSURE.
7. Do not install into a ceiling thermally insulated to a value
greater than R-40.
8. NEVER place a switch where it can be reached from a tub or
shower.
WARNING:
WARNING:
A SUPPLEMENTAL HEATER FOR USE WITH A TIMER OR A
SWITCH. IT IS NOT INTENDED TO BE USED AS THE PRIMARY
SOURCE OF HEAT AND CONTROLLED BY A THERMOSTAT.
www.airkinglimited.com
Bulb Heat Lamp
DO NOT INSTALL OVER A TUB OR MOUNT IN
DO NOT USE IN KITCHENS.
THIS UNIT IS DESIGNED AND TESTED TO BE
1 of 8