Kodak RDPF-1020W Mode D'emploi page 6

2. Insert your memory card or your USB flash drive.
3. Connect the power adapter to the photo frame and plug it into an electrical outlet.
Wall Mounting
Connecting the Power Supply
1. Place the frame on a flat, stable surface.
2. Plug the DC plug of the adapter to the jack marked "DC IN 5V" on the side of the
digital photo frame, and then connect power adapter to a standard 120-Volt AC
electrical outlet. The player will power on.
3. Press and hold the
4. When the unit is not being used for a long time, press the
unit to power it off and unplug the AC adapter from the electrical outlet.
Connecting a USB Drive
To view photos from a USB flash drive, insert it into the USB port on the side of
the frame.
NOTE:
Not all USB storage devices are compatible with this digital photo frame.
•
USB drive must be formatted using the FAT32 file system. Drives
•
formatted as NTFS or exFAT will not be recognized.
Inserting a Memory Card
To view the pictures from a Secure Digital (SD) or Multimedia Card (MMC),
insert it into the memory card slot on the side of the Digital Photo Frame with
the metal contacts of the card facing away from the LCD Display.
Button to power the frame on or off.
6
Button on the