Yakima Mako Saddles Instructions De Montage page 2

do you have - square - round - or faCtory Crossbars?
SQUARE BARS ONLY
Loosen the tabs in the
SQUARE
SnapArounds by bending
them repeatedly.
(SQUARE continued)
ROUND
Attach four SnapArounds to the
front crossbar (2 per saddle).
Attach four MightyMounts to the
front crossbar (2 per saddle).
If your MightyMounts require
bar caps, install them now.
FACTORY BARS
UNIVERSAL MIGHTYMOUNT
APPLY OPTIONAL FELT PADS.
ROUND / SQUARE:
• Push bolts through
saddles and into
SnapArounds.
• Attach hex keys
and tighten.
install seCond set of saddles or rollers.
SADDLES:
• Repeat installation for second
set of saddles,
YAKIMA HULLYROLLERS:
• Follow installation instructions
in HullyRollers kit.
1033426F-2/15
Follow the Universal MightyMount instructions and
#03590
refer to this instruction for correct installation.
Remove backing.
Remove the
tabs with
scissors or
pliers.
Apply to Mako.
FACTORY BARS:
• Push bolts through
the saddles and into
the MightyMounts.
• Tighten bolts with
MightyMount
wrench.
Repeat for each
Mako.