Oven Temperature Indicator; Telescopic Glides - Bertazzoni Master Serie Manuel D'utilisation

OVEN TEMPERATURE INDICATOR

The range is equipped with a device to indicate
the temperature in the middle of the oven. This let
you check the temperature inside the oven and
adjust food cooking temperatures more accura-
tely.
When the oven is turned on, the burner will start
working at maximum and the thermometer dial will
start to move towards the set temperature. Heat
is optimally distributed inside the oven when the
thermometer dial has stopped. When the oven is
turned off , the temperature on the thermometer
will slowly drop until it reaches room temperature
•
the gauge is for reference only.

TELESCOPIC GLIDES

The telescopic glides fi t any shelf level and work
with the wire shelves provided as standard equi-
pment.
Fitting the glides
•
Locate the two spring clips at the front and back
of the glides.
•
Locate the pin on the glide that indicates the
back.
•
Choose the right level and position the telesco-
pic glide near the upper wire.
•
Gently insert the front spring clip on the glide.
•
Insert the rear spring clip on the glide.
•
Pull and push each glide to ensure the correct
installation and smooth operation.
•
Extract both glides to the fully extended position
and place the shelf over them, making sure it's
accurately placed between the rear pin and the
front pin.
.
Removing the glides
1 - Locate the two spring clips at the front and
back of the glide.
2 - Gently pull down the front spring clip.
3 - Pull the glide away from the oven side - be
careful not to strain the clip.
4 - Repeat steps 2 - 3 on rear spring clip to remo-
ve glide.
/ Electric oven
1
2
3
4
17