Wifi Control; Wi-Fi Module; Storage; Cleaning And Maintenance - Casio SV 1200 Smart Mode D'emploi Original

8. When you want to change the settings please press
settings as described above.
9. You can deactivate the device by pressing
to standby mode.
► Risk of scalding! Carefully remove the food.
► If the device should indicate "EE1" in the LED display after switching on even though
the water filled in is above the minimum level, please add some salt to the water and
stir well.

18.2 WiFi control

The device can optionally also be controlled / programmed via app via WiFi. Download the
CASO-App to your smartphone or tablet. Details about the app, the scope of operation and
installation instructions can be found on our website www.casoapp.com/help

18.3 Wi-Fi Module

Press the button
once and
LAN (pairing process), the
constantly after a successful connection. If
the configured W-LAN could be achieved.(reception level is too low or W-LAN name or
access have been changed or W-LAN password is wrong). If the pairing process has not
yet been carried out, please follow steps mentioned in pairing instructions.

19 Storage

Store the unit in its upright position, out of the reach of children.
► Turn off the device after use. So you can avoid unnecessary energy consumption
and ensure your safety.
► Always unplug the appliance from its outlet immediately after using and before
cleaning.

20 Cleaning and Maintenance

This chapter provides important information on properly cleaning and maintaining your
SV 1200 Smart .
Warning
Note: EE1
briefly to activate the integrated W-LAN module.The device beeps
starts to flash slowly. If the device is aleady connected to your W-
PLEASE NOTE
for 3 seconds. The device will switch
flashes for approx. 3-5 seconds and lights up
continues to flash, no connection to
for 3 seconds and change
38