17.2 Assembling/Disassembling
Assembling of stainless steel skirt
Hold the SousVide Stick with the heating element upwards and open the clamp.
Slide the stainless steel skirt over the heating rods so that the arrow points to the
opened lock symbol
Make sure that the propeller does not
get caught. It must be positioned in the
centre of the hole in the clear plastic cover.
Rotate the stainless steel skirt until the arrow points to the closed lock symbol: .
For disassembling turn the stainless steel skirt counterclockwise.
Make sure that the
propeller does not get caught. It must be positioned in the middle.
Please note
► Make sure that the propeller does not touch the stainless steel skirt as it can easily
be deformed.
36